 |
| Quantity: | |
|---|---|
For 304 stainless steel, the Ni element in its composition is very important, which directly determines the corrosion resistance and value of 304 stainless steel.
The most important elements in 304 are Ni and Cr, but they are not limited to these two elements. Specific requirements are specified by product standards. The common judgment situation in the industry is that as long as the Ni content is greater than 8% and the Cr content is greater than 18%, it can be considered as 304 stainless steel. This is why the industry calls this type of stainless steel 18/8 stainless steel. In fact, the relevant product standards have very clear regulations on 304, and these product standards have some differences for different shapes of stainless steel. Below are some common product standards and tests.
To determine whether a material is 304 stainless steel, it must meet the requirements of each element in the product standard. As long as one of them does not meet the requirements, it cannot be called 304 stainless steel.
1、ASTM A276(Standard Specification for Stainless Steel Bars and Shapes)
304 | C | Mn | P | S | Si | Cr | Ni |
% | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.030 | ≤1.00 | 18.0–20.0 | 8.0-11.0 |
2、ASTM A240(Chromium and Chromium-Nickel Stainless Steel Plate,Sheet, and Strip for Pressure essels and for General Applications)
304 | C | Mn | P | S | Si | Cr | Ni | N |
% | ≤0.07 | ≤2.00 | ≤0.045 | ≤0.030 | ≤0.75 | 17.5–19.5 | 8.0–10.5 | ≤0.10 |
3、JIS G4305(cold-rolled, stainless steel plate, sheet and strip)
SUS 304 | C | Mn | P | S | Si | Cr | Ni |
% | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.030 | ≤1.00 | 18.0–20.0 | 8.0-10.5 |
4、JIS G4303 (Stainless steel bars)
SUS 304 | C | Mn | P | S | Si | Cr | Ni |
% | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.030 | ≤1.00 | 18.0–20.0 | 8.0-10.5 |
For 304 stainless steel, the Ni element in its composition is very important, which directly determines the corrosion resistance and value of 304 stainless steel.
The most important elements in 304 are Ni and Cr, but they are not limited to these two elements. Specific requirements are specified by product standards. The common judgment situation in the industry is that as long as the Ni content is greater than 8% and the Cr content is greater than 18%, it can be considered as 304 stainless steel. This is why the industry calls this type of stainless steel 18/8 stainless steel. In fact, the relevant product standards have very clear regulations on 304, and these product standards have some differences for different shapes of stainless steel. Below are some common product standards and tests.
To determine whether a material is 304 stainless steel, it must meet the requirements of each element in the product standard. As long as one of them does not meet the requirements, it cannot be called 304 stainless steel.
1、ASTM A276(Standard Specification for Stainless Steel Bars and Shapes)
304 | C | Mn | P | S | Si | Cr | Ni |
% | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.030 | ≤1.00 | 18.0–20.0 | 8.0-11.0 |
2、ASTM A240(Chromium and Chromium-Nickel Stainless Steel Plate,Sheet, and Strip for Pressure essels and for General Applications)
304 | C | Mn | P | S | Si | Cr | Ni | N |
% | ≤0.07 | ≤2.00 | ≤0.045 | ≤0.030 | ≤0.75 | 17.5–19.5 | 8.0–10.5 | ≤0.10 |
3、JIS G4305(cold-rolled, stainless steel plate, sheet and strip)
SUS 304 | C | Mn | P | S | Si | Cr | Ni |
% | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.030 | ≤1.00 | 18.0–20.0 | 8.0-10.5 |
4、JIS G4303 (Stainless steel bars)
SUS 304 | C | Mn | P | S | Si | Cr | Ni |
% | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.030 | ≤1.00 | 18.0–20.0 | 8.0-10.5 |
